Multi-phase field modelling using MICRESS® has been used to perform simulations of the nucleation and evolution microstructure in a 2D domain as function of fundamental thermo-physical parameters, time, cooling rate and chemical composition during solidification. In order to have a better understanding of primary precipitates (NbC, MnS) evolution during solidification in a case hardening steel, the simulation included the nucleation and growth of such precipitates coupled through thermodynamic databases. The results show a good comparison with the experimental microstructure measured with SEM-EDX measurements. The simulated time dependent segregation profiles of Nb and Mn in the interdendritic regions, and the precipitates composition, have a good similarity with the measurements. Even when the size and morphology of the NbC and MnS particles has a difference in the both simulated and experimental situations, this can be explained by the low resolution used in the simulation. This publication shows the modelling results and the comparison with the experimental measurements.